Tradename ò
Composition
Supplier

Properties

Function & Compounding

Stan-Mag AG
Magnesium oxide
RheTech Colors - A HEXPOL Companyï

Sp.gr. 3.22; surface area- 140 m2g;powder

A high activity, high surface area magnesium oxide for stabilizing chlorinated polymers- CR,CSM,and CPE

Stan-Mag AG
Magnesium oxide
HB Chemicalï

Sp.gr. 3.22; surface area- 140 m2g;powder

A high activity, high surface area magnesium oxide for stabilizing chlorinated polymers- CR,CSM,and CPE

Stan-Mag Bar
65% Magnesium Oxide in napthenic oil
RheTech Colors - A HEXPOL Companyï

Sp. gr. 1.80

A high activity, high surface area magnesium oxide for use as an acid acceptor in chlorinated polymers CR,CSM and CPE

Stan-Mag Bar
65% MgO in a proprietary binder
Harwick Standardï

Sp.gr. 1.80;bar form

Medium-high activity grade MgO used as an activator, acid acceptor and scorch protector for halogenated polymers such as CR and CSM

Stan-Mag DS2
Magnesium oxide
HB Chemicalï

Sp.gr. 3.22;surface area- 165 m2g; powder

A high activity ,high surface area magnesium oxide for use as an acid acceptor in chlorinated polymers CR,CSM and CPE

Stan-Mag DS2
Magnesium oxide
RheTech Colors - A HEXPOL Companyï

Sp.gr. 3.22;surface area- 165 m2g; powder

A high activity ,high surface area magnesium oxide for use as an acid acceptor in chlorinated polymers CR,CSM and CPE

Stan-Mag DS-2 Bar
57% Magnesium Oxide
RheTech Colors - A HEXPOL Companyï

Sp. gr. 1.80

A high activity, very high surface area magnesium oxide for use as an acid acceptor in chlorinated polymers CR,CSM and CPE

Stan-Mag MBZ
Co-dispersion of Magnesia and Zinc
Harwick Standardï

Free flowing powder, 2.0 sp. gr., 65% active

Proprietary blend of zinc and magnesium oxides for polychloroprene vulcanization. Designed for use at 3 - 5 phr in polychloroprene to replace all magnesium and zinc oxide in a formulation.

Stan-Mag Mini Beads
Medium light calcined, high activity magnesium oxide in a paraffinic oil binder system
HB Chemicalï

Sp.gr. 1.80; small bead form; 65% activity.

Pre-wet form which is non-dusty, free flowing and protected from the deleterious affects of humidity; use for rapid dispersion in halogenated polymers as an acid acceptor, scorch protector and curative.

Stan-Mag Mini Beads
Medium light calcined, high activity magnesium oxide in a paraffinic oil binder system
RheTech Colors - A HEXPOL Companyï

Sp.gr. 1.80; small bead form; 65% activity.

Pre-wet form which is non-dusty, free flowing and protected from the deleterious affects of humidity; use for rapid dispersion in halogenated polymers as an acid acceptor, scorch protector and curative.

Stan-Mag MLW
Lightly calcined magnesium oxide
HB Chemicalï

Sp.gr. 3.22; surface area- 115m2/g; 98% passes 325 mesh

Medium-high activity and surface area grade used as an activator, acid acceptor and scorch protector for halogenated polymers CR, CSM and CPE

Stan-Mag MLW
Lightly calcined magnesium oxide
RheTech Colors - A HEXPOL Companyï

Sp.gr. 3.22; surface area- 115m2/g; 98% passes 325 mesh

Medium-high activity and surface area grade used as an activator, acid acceptor and scorch protector for halogenated polymers CR, CSM and CPE

Stan-Mag Products
Magnesium oxide
Harwick Standardï

A variety of of magnesium oxide based products in powder, bead, or bar form

Starmag 150
Magnesium oxide
HB Chemicalï

Surface area 135 m²/g; iodine absorption 155 mg./g; bulk density 0.35 g/ml; fine white powder

High activity for use with Neoprene and other chlorinated polymers; acts as an acid acceptor and high temperature aging improver.

Starmag CX-150
Magnesium oxide
HB Chemicalï

Surface area 135 m²/g; iodine absorption 145 mg/g; bulk density 0.35 g/ml; fine white powder

Excellent processing and dispersion; recommended for fluoroelastomer compounding; high activity; known for superior dispersability.

Starmag CX-50
Magnesium oxide
HB Chemicalï

Surface area 42 m²/g; iodine absorption 50 mg/g; bulk density 0.51 g/ml, fine white powder; recommended for Viton, Fluorel; med. activity because of its superior dispersion.

Excellent processing and superior dispensability.

Starmag U
Magnesium oxide
HB Chemicalï

Surface area 145 m²/g; iodine absorption 160 mg/g; bulk density 0.43 g/ml; fine white powder

Highest activity for use in Neoprene G, W, TW types; acts as an acid acceptor in rubber and styrenic resins, CR contact adhesives; recommended for SMC thickener.

Stearic Acid
Rubber grade stearic acid
The HallStar Co.ï

Sp.gr. 0.84' white flakes, mild fat odor; non-toxic; mp, 70°C; idine no, 9.5, titre 52°C, acid number 197-209.

For NR, SRs (except IIR), latexes; activator; plasticizer; softener; gives acid-type activation; improves processing; aids filler and pigment dispersion; add directly.

Stearic Acid
Stearic acid
H.M. Royal, Inc.ï

Sp.gr. 0.84; white powder, flakes, slabs; mild fat odor; non-toxic; mp, 126-133°F; iodine No, 0-15; mp and Iodine number both depend on purity (whether single, double or triple-pressed).

For NR, SRs, (except IIR), latexes; activator; plasticizer; softener; gives acid-type activation; improves processing; aids filler and pigment dispersion; add directly.

Stearic Acid - Industrene
Stearic acid
R.E. Carroll Inc.ï

White powder or flakes.

Single, double, triple pressed.

Ø Main Menu
Ø Subscribe